USA CORP MODEL "A" (DIAMONTEL MESA 60) NOTES: These are single NAM units. The ESN prefix is 134 decimal, 86 hex. See file MITSTEST.TXT for test mode access. MITSUBISHI: 708-860-4200 NAM programing: 1. Press FCN & 0 for one second to turn on phone. 2. Wait for the wake up cycle to end and the display to clear. 3. Within ten seconds press and hold the CLR key while entering 4 4 7 6 8 2 2 or 4 4 7 2 8 6 6 (reset code). 4. Release CLR. 5. The phone will display the first data entry. 6. Press the SEND key to store information and increment the step number. 7. Press CLR to correct any item. 8. Press END to complete programing and exit. PROGRAMING DATA: STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 10 DIGITS MUTE MIN (AREA CODE AND TEL#) 02 4 DIGITS SEC SECURITY CODE 03 00000 - 32767 Sid SYSTEM ID 04 0 OR 1 LU LOCAL USE MARK 05 0 OR 1 E MIN MARK 06 333 OR 334 IPCH INITIAL PAGING CHANNEL 07 2 DIGITS ACC ACCESS OVERLOAD 08 0 OR 1 PrEF PREFFERED SYSTEM 09 00 TO 15 GI GROUP ID (10 FOR USA) 10 0 OR 1 EE EE 11 0 OR 1 rI ROAM INHIBIT 12 0 OR 1 Ab PREFFERED SYSTEM 13 0 OR 1 AL AUTO LOCK 14 0 OR 1 bO AUXILARY ALERT NOTES: To install lock code: With phone out of programing mode press FCN, STO, NNNN LLL CLR (where NNNN is 4 digit security code and LLL is new lock code). LOCK: F 2. UNLOCK: Enter three digit code then STO. SYSTEM SELECT: F 1 displays current, then press one of the following: "A" preferred phones: 0 = Pref A, 1 = Pref B, 2 = Home Only, 3 = A only, 4 = B only. "B" preferred phones: