Public Message Message # 2540 *MM1 TECH Echo* To : Russ Magee From : Tim Jones Subject : my HD has died..? Date : 94/02/22 20:21:00 RM> Sigh..yesterday, my MM/1's hard drive decided to stop letting me in. RM> Sysgo dies upon booting from floppy, stating "can't RM> CHX to /h0/cmds" or something similar, after RM> printing "Error #246". OSK manuals say error #246 RM> means "device not ready". Can you tell if the drive is spinning up? You may take the drive and twist it slam it into your palm then power it up. If you have a stiction problem this will usually get it going, at least for a while. Tim --- Maximus/2 2.00 * Origin: If I Only Had 1/MM - [512-280-6578] (1:382/107) Public Message Message # 2541 *MM1 TECH Echo* To : Colin Mckay From : John A Donaldson Subject : Re: KTerm Problem Date : 94/03/03 19:30:00 I'll put that idea on my list of priorties. First on my list is getting ZModem RX/TX working. Second is to fix a minor problem in the ANSI Color Routine. Third fix YModem TX to be a batch type TX Forth your idea of switching to the enviorment varible MODEM Fifth your -? idea. John A Donaldson --- RiBBS v2.10 * Origin: THE-GOLDEN-COCO-bbs,RIBBS/OS9/OCN,HOUSTON,TX (1:106/941) Public Message Message # 2542 *MM1 TECH Echo* To : Colin Mckay From : Russ Magee Subject : Re: my HD has died..? Date : 94/02/25 20:29:00 Re: dead hard drive Yep, I've tried going back to an old boot disk, loading up the hard disk drivers, inizing /h0 etc. No luck. Darn stubborn thing..if nothing else, I plan to give myself a free lesson on the inside guts of modern hard drives.. At least I've got a minimal floppy-based system back up, so I can start re-doing some of the work I lost. thanks, -Russ --- Maximus 2.01wb * Origin: The MM/1 Keyboard [Calgary, AB 403-246-6943 HST/DS] (1:134/67)