-----------------------------------------------------------------------------
                
                                                            
                    
                                  
                                                   
                                        
                                             
                                             
                                        
                                                   
                              
                
                             The Hacker's Choice            
                
--------------------------------------------------------------------------------


                             THC-SCAN v1.50
                  (c) 1996,1997   by van Hauser / THC



                               H I S T O R Y


            * New Feature   - Removed Feature     # Bug Fix              
            + New File      ! Important Note      ? Check It



****** v1.50 (03-Dec-97) PUBLIC FINAL (guess ;-)
    * Now the irq can be set above 9. (Up to 99 now, okay so FatalError? ;)
    # Ooops, the execution of programs via F1 to F8 didn't work :-(( silly me
    # ShowData (ALT-D) in the Terminal showed no statistics. Fixed.
    # No Directory was created with the /P option when dialing from a
      text file (thanks to FatalError again for reporting)
    ! All programs could be aborted by pressing Control-C. For some guys
      a nice feature if something locks up, but if someone accidently
      hits it ... disabled now.
    * New key while scanning: D drops from 10 numbers around the one you
      are currently scanning. f.e. pressing D while scanning 437 or 430
      drops 430 to 439 (43X) from being scanned without changing their ID.
      (someone requested that)
    * Enhanced the DIAL_DELAY and SEND_DELAY stuff because it didn't work
      with all modems (now for most types, I hope)
    * MOD-DET.EXE does check for modems up to irq 14 now (-H option)


****** v1.40 (14-March-97) PUBLIC FINAL  (again ...)
    # Fucking BUG found. RuntimeError when passing 23:59h ... what a fuck ...
      was introduced in v1.1 ...
    # Fixed -S:<time> and -E:<time> switches
    # some minor enhancements & bugfixes
    * Added -J[:<number>] switch : Jam Protection, to detect Telecom Jams who
      does either not give you a dialtone or set the line busy immedeantely
      after dialing 1-3 digits. Default when set : 6 seconds.
      Read the documentation (THC-SCAN.DOC) -> "How to prevent scanning
      detection from phone companies"
    * Added -V[:<number>] switch : Verify that the modem is still there &
      ready. Every <number> (standard is 13) an AT is send to the modem to
      ensure it's still alive. Also after 3 Timeouts this check is made.
      Some old US Robotics sometimes don't do what they should. *sigh*
    * Added -U[<:number>] switch : If a VOICE response is detected with no
      RING up to <number> (standard is 5) seconds elapsed time, then it will
      be identified as UNUSED.
    * Now you can enter keys while waiting for "Wait between calls"


****** v1.30 (1-March-97) PUBLIC FINAL
    # Some minor fixes
    # updated the documentation
    - removed X00-202.ZIP because it's too large and is not useful for most guys
    * repacked the stuff. 3 sub .ZIPs are now included for .EXE, .DOC and misc

****** v1.20 (11-Feb-97) PRIVATE BETA
    ! THC-SCAN runs also under Linux in the dosemu - try it out !
    # many small bugs fixed, introduced do the big changes in v1.1
    * now dialing "abcd" possible in the dialmask (wish of Water)
    * No. of Carriers, VMBs etc. are now loaded from the DAT files
      (idea of Fatal Error)
    # fixed found bugs in Range and Exclude Parameters
    # while entering a comment, the time was not stopped. fixed.
    * some cosmetics

****** v1.10 (22-Jan-97) CLOSE BETA
    * Better Timeslicing for Desqview, OS/2 and Windows
    * Time evaluation is now optimized and accurate
    * Comments may now be longer -> up to 250 chars (Okay Analyst?)
    * Modem Inits + Responses now also written into DEBUG.LOG 
      (with -& for debugging) (that too?)
    * New Commandline Option /LCD - for LCD and Hercules Monitors
    * New Commandline Option /P:<PATH> - saves all .LOG and .DAT files in the
      specified directory, which are created if not present. If you just use
      /P without a path, a directory with the same name as the .DAT file will
      be created and used as path. (demanded by several guys)
    * New Option after MANUAL (enter) : S for Save Comment (forgot who suggested it)
    * New Special Char for the Nudge String : ^! sends a break
    * New Key : Control-+ and Control-- for increase/decrease Ringcount
      for that call only
    * when using the -o outdial option and no carrier present you get a
      terminal, and after exit if carrier begin scanning.
    * when using the -o outdial option and carrier is lost to the outdial
      carrier, thc-scan exits with errorlevel 22
    # Removed "on xxx sec" on some output it shouldn't be written
    # ringout and timeouts are now counted to "others" in the Stats
      (not included before)
    # Now Range/Drop/Exclude input checks a made to prevent runtime errors
      due false input
    * New Option in TS-CFG : SMART/DUMB - Smart does only hangup the carrier
      when it's needed, not like DUMB even after a BUSY.
      Dumb is only useful on special occasions and configurations.
    * New Option in TS-CFG : CHECK/WAIT - Check waits for the OK after each
      command it is expected and do more errorchecks, Wait does only wait
      for the specified Command_Delay time and continues.
      Wait is only useful on special occasions and configurations.
    * New Option in TS-CFG : ScreenSaver - Blanks the screen after the defined
      minutes have passwd and no keys were pressed.
    * New Option in TS-CFG : Suspend Blank - While hacking a carrier, the
      screen unblanks if ALT-B, autoblank parameter /= or screensaver are
      active. (idea of Euronymous)
    # When you are in Pause mode, time will not add to calculate ETA anymore
      (thanks to Plasmoid for that one)
    # After a jump2dos, and changing directories, .DAT and .LOG files were
      saved in that directory. (found by Data)
    # Numerous little enhancements, fixes, cosmetics ...
    + New Files included : 
        + THC-INTRO.EXE - a nice demo for thc-scan & login hacker ;-)
        + MOD-DET.EXE - detects modems with their settings - automatically !


****** v1.00 (01-May-96) ! Public *FINAL* Release !
    ! No more bugs found !
    ! Special thanks to The Analyst, Wilkins and Plasmoid for their support!
    ! Thanks to Scavenger and Scythe, too!


****** v0.9f (18-Apr-96) CLOSED GAMMA - PRE-FINAL
    # Tried to fix the Fossil Hang-up Procedure, to make it work with every modem.
    # Valid DialPrefix checked in Dial_Mode (ALT-D).
    # Fixed bug with the locked-up ports with 14400+ baud on some computers.
    + TS-CFG rewritten from scratch. Supports now VGA and LCD screens.
      Better Help, easier to use. Thanks to Scythe for the basic routines.
    * DOC files partially rewritten and error checked. Thanks to The Analyst!


****** v0.9e (29-Mar-96) PRIVATE GAMMA - PRE-FINAL
    * Pressing Backspace in Textfile_Scan_Mode now re-dials the previous number.
      With this feature you can scroll back to the start of the textfile.
      (Suggested by The Analyst & Wilkins)
    * ELAPSED_TIME is now written into all logfiles (if option is activated).
    * Sequential scanning will now start with the number read in from the
      first Range (-R<from>-<to>) specification.
    # Fixed bug when re-dialing a number while textfile scanning.
    # Removed accidentally a line, which made Fossil usage impossible. Fixed.
    # Some Cosmetics


****** v0.9d (26-Mar-96) CLOSED GAMMA - PRE-FINAL
    * Now a .DAT file is created when scanning numbers from a textfile to
      continue an aborted textfile scan at the same number. (Idea of Wilkins)
    # If you select only 1 number in the Redial_Last_20_Numbers (Backspace)
      Menu, this number will now be re-dialed immediately.
      Otherwise you must wait, until they'll be dialed again randomly.
    # Enhanced/Fixed Modem_Hangup with the Fossil Driver.
    # Fixed a bug in Save_Comment, when at a full line a character was added 
      somewhere else than at the end.
    * If you specify only a "X"  as ID for DAT-STAT.EXE, a list like THC-SCAN.LOG
      will be written into the output file.
    # Enhanced the DAT-MERG.EXE mask detection routine.


****** v0.9c (16-Mar-96) PRIVATE CEBIT '96 RELEASE - PRE-FINAL
    ! Many, many new features, as you can see below. Test, test, test & test!
      Report any bugs, so that the Final v1.0 Release will be bug free ! ;-)
    ! Be careful, while executing external programs, if no fossil driver is used.
    * Dialing via an external program possible now (wish of Scavenger to use
      his BB dialer to dial+break and this scanner to scan+identify ;-).
    * Delay dial added. Change the dial speed for every phone number dialed
      and/or dial every digit of the number with a random delay.
      Now important for Germany to prevent scan detection. (Read THC-MAG1.ZIP)
    * New option in THC-SCAN : print the elapsed time for every number in the
      main logfile. (option is in TS-CFG) (Idea of Tron X & The Analyst)
    * Auto-Countries with ALT- 6 to 9 ... if in ON mode, every number gets
      automatically this country-flag. (The Analyst's Idea)
    * P for Pause renamed to Extented_Pause with ALT-P. Fast_Pause is now P,
      which does a hang-up and waits for a key to redial. (The Analyst's wish)
    * Auto_Dat_Save before execution of any program (Jump2Dos, F-Keys etc.)
    * On Modem_Timeout (NO CARRIER) while in any of the menus, you'll get an
      pop-up window asking you, how to handle this result (redial, carrier etc).
    * Debug switch -& writes now to DEBUG.LOG instead of MODEM.LOG
    * Wait_Between_Modem_Commands added into TS-CFG (for BAD modems like CREATIX)
    # Valid_Dial_Prefix checked in Manual mode.
    # Now you won't even unprotect the .EXE files with INTRUDER ... ;-)
    # Some cosmetics & some small fixes.
    + Added NETSCAN.BAT - a batchfile for guys scanning with 3+ modems at once.
    + Added PROBLEMS.FAQ - Common problems and their solution with THC-SCAN.
    + Added KEYBOARD.DOC - Short table of the most common online keys.
    + Added X00-202.ZIP - X00 Fossil Driver.


****** v0.9b (03-Mar-96) CLOSED BETA
    * FOSSIL support included! Please test this! Check out the necessary
      options in TS-CFG !
    ? Control-Break enabled to terminate THC-SCAN.EXE if somehow the fossil
      support should lock up. Should never happen ;-).(For this version only)
    # Scanning through a modem dialout in terminal mode and pressing ALT-H
      disconnected the line YOUR-MODEMDIALOUT-MODEM instead of
      DIALOUT-MODEMHACKED-CARRIER. Fixed. (Reported by myself ;-)
    # Dialing numbers from a textfile possible again. Bug was introduced
      in v0.8b (Reported by Wilkins)
    # Small bug fixed with /W:<number> option identification (Rep. by Scythe)


****** v0.9a (20-Feb-96) CLOSED BETA
    * Optimised Desqview/Windows/OS/2 Support. Custom optimisation now
      possible, with the assignment of a number of timeslices to give away.
      Expanded syntax for /W: Either /W as before to set timeslice
      to 36 (standard) or  /W:75 to set timeslices to 75 f.e.
    * After dialing a number in Manual/Autonom Mode (or pressing M online),
      You may change the ID to VMB/Tone/Manual/Custum1-3/UnChanged/UnDialed ...
      If VMB or Tone is selected, it will be saved as Vmb/Tone+Manual (see below)
    * VMB & Tone manual tries are now implemented into DAT File.
      See DATFILE.DOC for ID Codes. THC-SCAN Utilities updated for the new IDs.
    * <DEL> Pressed online resets the current number to UnDialed
    *   O   Pressed online set the current number to (normal) vOice
      (V is already for VMB) ... so you don't need to specify every silly
      voice manually as "Yelling Asshole" ID
    * Online Help (Press "?") expanded to the new keys.
    + File EXAMPLES.ZIP added; includes 3 good .CFG files



****** v0.9 (15-Feb-96) *PUBLIC* BETA
    * Commandline switch  /W for betatesting purpose added.
      Does an autodetect for Windows/Desqview/OS/2 and time slicing.
    * Commandline switch  /= added. Blanks screen automatically;
      for remote & timestarting scans. (Idea of Nethack)
    * On finding a tone, you'll now hear a beep. (Idea of Echo 0ff)
    # Runtime_Error eliminated in continued scanning with sequential dialing.
    # Fixed a serious bug in the .DAT file reading procedure (If .DAT file
      exists). Bug was introduced in v0.8b; thus impact only on betatesters.
    # Desqview support seems to be fixed.
    # Fixed filename display in TS-CFG, if file was not in the same directory.
    ! If you are not a THC betatester, read the history of 0.8c, 0.8b and 0.8a!
      There are MANY new things!


****** v0.8c (07-Feb-96) CLOSED BETA
    * Scanning through a modem outdial is temporarily included. 
      Option is "-O" to activate. Define Target_Flee_Char in TS-CFG first!
      Read Documentation for full information!
    * ALT-A Alarm Key now available. Loads THC-SCAN.BIN (4000 bytes) to screen.
      Modem hangs up automatically in Scan Mode, waits in Hack Mode.
    # New ALT-Keys added into Online_Help_Display.
    # Optimised dialmask verification with old .DAT files.
    # Dialmask usage from .DAT file only worked in Carrier_Scan_Mode.
    # 3 Bugs killed in the TS-CFG base address calculation. (Reported by Nethack)
    # Bug in DAT-MERG corrected: wouldn't merge the files correctly.
      (Reported by Plasmoid)


****** v0.8b (31-Jan-96) CLOSED BETA
    * The .DAT file will now contain the total minutes used for scanning
      incl the Scan Mode.
    * Added Dialmask and Scan_Mode check when using an existing
      datafile for scanning. (to prevent mixed up datafile of no use ...)
    * ALT-N No_More_Busy while scanning gives you now the possibility to stop
      re-dialing busy numbers in Random_Scan mode. (Idea of Plasmoid)
    * ALT-U Update .DAT file (Saves .DAT file, creates backup of old one.)
    * If no Dialmask is specified and an existing datafile with Dialmask
      in the header is specified, this Dialmask and Scan_Mode will be used.
      (Idea of Plasmoid)
    # Made the identification for 7E1 and 7O1 more accurate to prevent false
      detection. (Reported by Plasmoid)
    # ETA display fixed. (Reported by Plasmoid)
    - Removed Tone_Hack feature to autoscan length of a Tone/PBX number.
      (Was too complex and too unreliable. It's faster, to do it by hand. 
      And you must do it anyway ...)
    * If an unusual base address is defined in TS-CFG, you will now be warned,
      instead of the input being reset. (For Digiboard users and the like)
      (Idea of Nethack)
    * THC-SCAN config file structure cleaned up.
    * DAT-MERG will now add minutes used for scanning into the Maindat and
      Scan-Mode check added. DAT-CONV will convert time in TL<->TS.
      DAT-STAT will now report the time used for scanning and Scan_Mode.
    * Rewrote DATFILE.DOC to be used as an C Header file and also updated data.


****** v0.8a (25-Jan-96) CLOSED BETA
    + Added DAT-MERG.EXE, which merges .DAT files together. It does an
      intelligent Dialmask check or, if not possible, prompts for a correct
      mask . You can merge small area scans to a big area scan file.
    * Added direct ID_change of one special number in DAT-MANP.EXE.
    * Added prefix possibility to EXTR-NO.EXE. (Idea of Wilkins)
    * When using "?" Help while scanning, the defined names for CUSTOM 1-3
      will be displayed in the Help_Window. (Idea of Plasmoid)
    # Fixed DAT filename calculation when adding .DAT as suffix.
    # Fixed Runtime_Error when using Backspace/Redial last 20 numbers.
    # Fixed output display in MANUAL.LOG
      (All bugs found by Plasmoid)


****** v0.8 (19-Jan-96) *PUBLIC BETA*
    * Cosmetics
    * Added -N parameter switch for THC-SCAN, which means NO_EFFECTS.
      In future that will also mean: NO_ASM to be Desqview compatible.
    + Added TXT-CONV.EXE, which is a generic converter to change files 
      to 7E1 or 7O1 output display, convert them to unix/amiga/msdos text
      format, or just remove any chars above the value of 122.
    ! Thought the Scanning Process itself is Desqview compatible and aware
      nor are the screen window features. I hope I can work around this
      problem in future. Sorry, that it doesn't work properly with Desqview yet.
    ! Someone reported to me, that he saw a file called THC!WS07.ZIP on a BBS.
      If you ever see a file called THC!*.ZIP on a BBS, please tell the Sysop
      to delete it: those are only outdated betatest files, and NOT for public
      release! This special file was just a test for one special function
      to be implemented into THC-SCAN, so it's not worth downloading it.
    ! If you aren't a THC betatester, read the history of 0.7a too!


****** v0.7a (09-Jan-96) CLOSED BETA
    * Added GREAT feature : Scanning numbers from a list!
      Format : One number per line, no other chars on the line but the number!
      Read documentation for details, as how to use this and what to keep in mind!
    + Added EXTR-NO.EXE, which extracts (phone-)numbers from a file. It contains
      all the necessary options to get the correct format. (For textfile dial)
    * Made MANY design/cosmetics/enhancements in Terminal_Mode & CARRIERS.LOG.
    * The message [NUDGE END] will now be displayed after the whole nudge
      string has been sent.
    * ALT-S in Terminal_Mode now sets COMMENT to ON. You will be asked for the
      comment after having left Terminal_Mode. NOTE: The former ALT-S -> Statistic
      Key is now renamed to ALT-D Data Statistic !  ;-)
    * Pressing F1 in Terminal_Mode now shows the second key types to enter.
   *# Fixed ALT-P Data_Parameter_Switch in Terminal_Mode (8N1/7E1).
      It switched into the wrong mode ;-). 7O1 mode added.
    * Made some cosmetic enhancements in the log screen/file. (Idea of Tron X)
    # If a connect went wrong during connecting , it wouldn't detect the
      NO CARRIER as CARRIER response, instead wait for time-out :(  fixed.
    * Now the harddisk is checked for at least 250kb free space (500kb if
      /& modem output log is activated). It is exited with errorlevel, 
      if not enough free space is found.
    # Fixed a bug when using -X option with fewer then 4 X's in the dialmask.
      (Thanks to Brainwave for reporting)
    * Optimised the modem delays.
    * You can now enter lowercase characters in the NUDGE string in TS-CFG
    * Added in TS-CFG the following option : Modem_Hangup FAST/SECURE:
      Choose FAST and try this with a) normal scanning, b) carrier hang-up
      c) choose manual/autonom mode and scan. If everything works fine, use
      this mode, it's much faster. It works great with Zyxels, but USRs are
      much slower. Try it!
    * Added the keys [TAB] and "N" to the online keys. With those you get
      to the next number WITHOUT saving a primary ID (quite interesting).
      This is the only possibility to save a secondary assigned custom ID and NOT to
      change the current ID setting of the number. (Wilkins gave me this Idea)
    * Added one more help screen (7 now) ...
    # Have you seen the wonderful feature to EXECUTE a program when special
      Modem Responses/IDs have been set? I THOUGHT, I'd implemented it - but
      didn't ... hehehe .. sorry guys :-)) ... But here's to cheer you up, since
      you were spending HOURS figuring out, why it didn't work : Now you can assign
      also TIMEOUT and RINGOUT to execute a program. ;-) And it works now!
    ? Please check the execute functions out several times before using them
      regulary. If you encounter problems : Free more memory ! Load himem.sys!
      Disable your cache program (smartdrive, pc-cache etc.) !


****** v0.7 (06-Jan-96) *PUBLIC* BETA
   ->>> First public release.
        a BIG Thank You to Omega, for installing the BETA Area on A.D. !
        Also thank you to my best beta testers: The Analyst, Wilkins, Plasmoid
        And to the other testers who reported: Tron X, Brainwave
        And blame to all the others who tested but didn't report.
        Additional thanks to Plasmoid/DeeP & Marquis/UCF for your support.
    * Added DIAL_AGAIN_MENU, press [BACKSPACE] online to get a select menu for
      the last 20 dialed numbers. Selected numbers will be dialed again.
      (The Analyst's great idea!)
    # Fixed a bug in my Time_Elapse calculation library.
    # Fixed some other silly bugs I deny ever existed!
    # When All_Comment_Mode was activated and paused, then Next/Redial selected,
      you were ask for comments until end of time. (Reported by The Analyst)
    * And again some cosmetics.
    + Added SIGS.ZIP, which includes PGP signatures for all EXEcutables, plus
      my public PGP key, plus a BATch file to automatically check them.


****** v0.6c (02-Jan-96) CLOSED BETA (Happy new Year!)
   ->>> I'm skipping 0.6b release: There were SO many new features in pseudo v0.6b.
        All releases distributed differed widely in their status of progress.
        AND I received many, many demands for new features. 
    * New logfile output. (Not the main scan log). A comment will now be saved
      to the log type it belongs to, as are the other 2ndary flags. 
    * Switched the keys in PAUSE function.
    * ALT-C turns comment mode on/off : Comment EVERY number.
    * Disabled Control-C Abort ...
    # Fixed a bug in SAVE COMMENT comment, where the last char was deleted.
      (all of the above suggested by The Analyst)
    # Fixed ETA display (Estimated_Time_of_Arrival)
    * Added a sixth help screen when pressing "?" while online.
    * Plus some more enhancements & cosmetics.
    ! The EXE files are now crypted with an Exe-Crypter especially made from
      Marquis de Soiree  UCF.  Thanks!


****** v0.6b (30-Dec-95) PRIVATE BETA (only released to Wilkins, Plasmoid,
                        The Analyst, Scavenger, Chotaire & Marquis de Soiree)
    ? I hope I made it Desqview compatible and support it - please TEST !
      (I don't use Desqview, so ...)
    * Auto_Data_Mode detection implemented.
      Modem_Data 8N1 must be selected for this to work and can detect
      7E1, 7O1, or if it's really 8N1. Cool! Not just a silly stripping!
    * You can now also dial "*" and "#" in the dialmask.
    * New option in TS-CFG : Delete zero byte LOG files when exiting THC-SCAN
    * TS-CFG does now convert all old CFG files from version v0.6a on.
    # In TS-CFG the modem responses could only have letters, no numbers or
      spaces (!). Changed that. (Reported by Tron X)
    + Added DAT-CONV.EXE, a DAT converter for THC-SCAN and TONELOC DAT files.
      Auto-detects the DAT file type and converts to the other type.
    + Added DAT-MANP.EXE, a DAT manipulator for THC-SCAN DAT files.
      Exchange one value ID with another. May be done with a whole type.
      It can also transfer the number of rings to the new type.
    + Added DAT-STAT.EXE, a DAT statistic viewer. Prints the number of any
      type. Optional: writing special ID numbers into a file.
    * Cool effects added (Unit from PLASMOID  DeeP - thanks Chummer!)
    * ALT-B Bosskey added. blanks screen, Alt-B to un-blank. Screen will be
      updated with latest scan data. (Thanks to PLASMOID  DeeP here too ;-)
    * ALT-P in Terminal_Mode lets you change the DATA Parameter now: 
      8N1 or 7E1.    
    * Pressing "X" online has now got a limit of 255 seconds for the 
      time-out adding. Progress_Bar is also updated now. (Idea by Tron X)
    * Added "+" and "-" online keys. "+" and "X" add 5 seconds to the 
      time-out length temporarily, "-" decreases this by 5 seconds.
    * Time-out added when carrier hacking in mode 2, if 5 minutes after connect
      no key is pressed.
    * did some cosmetics (truncating long numbers to fit into screen, terminal)
    # I hope, I fixed the bug, which did not count the ToDo's correctly (Rep. by Wilkins)
    * When selecting (C)ontinue in the PAUSE Menu, the O-time will be reset.


****** v0.6a (27-Dec-95) CLOSED BETA
   ->>> THC-SCAN enters now CLOSED BETA TEST PHASE.
        All users of LORE BBS and selected users from ARRESTED DEVELOPMENT
        can now test THC-SCAN.
    * Alt-D Dialmenu implemented.
    * Custom 1-3 can now be assigned to be secondary identifications each
    # Once again Hang-Up procedure changed. So many modems need that to be
      done in a different way ... please test it with your modem & report!
    # Bug in Auto_Save_DAT procedure. THC-SCAN reported "all scanned" after save
    # Some handling bugs in SAVE COMMENT fixed.
    # Comments weren't saved into the COMMENT log file
    * changed the Debug_Command_Line option -% to -& (incompatible with 4DOS)
    * ETA is now defined more precisely
    # Two bugs in TS-CFG fixed while editing.
    * Did some cosmetics
    # M for Redial+Manual seemed to have a bug - hope it's fixed.


****** v0.5b (25-Dec-95) PRIVATE BETA
    * TS-CFG is now final - with help/checks etc. ready and tested!
    * CARRIER HACK is now supported : Nudge_String, Nudge_Delay, Self_Mode etc.
    * Now one can choose to specify both Start_Time (/S) and End_Time (/E),  
      only one of them or none.
    * ALT-O pressed online now loads TS-CFG, changes your config, saves and
      uses the new data.
    * When executing a file from CFG, ^D will be substituted with the dialed
      number.
    * After using the option M for Redial_Manual, the mode was not reset. 
    # Manual mode could only be run, when specified in Command_Line.
    # Auto_Saving_Dat file could produce an error where "To Do" would show 65535
      and you couldn't exit as usual with ESC.
    # In Non_Autonom mode the AUTO_Detect was also started, which would result 
      in a hang-up.
   *# Enhancements & fixes for the Manual/Autonom and Carrier_Hack modes.
    # Fixed again the hang-up procedures.


****** v0.5a (20-Dec-95) PRIVATE BETA
    + Config_Maker included : TS-CFG.EXE
      NO help is specified there by now, so don't play with the options !!
    * AUTONOM MODE IMPLEMENTED! (Press Enter to continue dialing when in mode)
    * TONE SCAN MODE IMPLEMENTED!
    * Now F1 to F4 can also be assigned to run some programs.
    * MENU WINDOWS IMPLEMENTED ! The Following Menu functions included :
          Alt-S - Speaker On/Off Window
          ENTER - In Autonom/Manual mode - continue dialing window
    * Save .DAT file every X minutes
    * Custom 1-3 can be renamed in CFG
    * New Commandline switch : -% for debug mode, all modem output->MODEM.LOG


****** v0.4 : (17-Dec-95) PRIVATE BETA
    * NEW ANSI DESIGN !
    * MENU WINDOWS IMPLEMENTED ! For the following commands :
       P   Pause Window
       S   Save Comment
     Alt-T Terminal Mode
     Alt-J Dos Shell (yep, implemented now!)
     Alt-M Online Mode Change for Carrier/Tone and Autonom Mode on/off
     F5-F8 Function keys : Those are now assigned 4 programs, which
           will be executed, when keys are pressed. They can be changed,
           when the Config.EXE file is ready, . Present allocation: F5 = LOGINH.EXE,
           F6 = PBXHACK.EXE, F7 = THCCRED.EXE and F8 = SAMPLE.BAT.
     Incoming_Call_Detection window


****** v0.3 (15-Dec-95) BUGFIX PRIVATE BETA
    # Disconnect after connect should work now.
    # Carriers are written to log.
    # Numbers to dial now bug-fixed, no doubles anymore.
    # Numbers to dial are now all in range (-R, -D, -X etc).
    # Dat file is now saved correctly.
    # Outrange/Drop/Excluded are now correct.
   ->>> If you want to use your OLD DAT files you must delete Byte 33-36 !!! 
   ->>> (Total length should be either 42,132,1032 or 10032)


****** v0.2 (10-Dec-95)
    * NOW it can identify everything! (at least i hope so!)
      You can use the following keys while scanning :
      PRIMARY
       B Busy, C Carrier, F Fax, G Girl, I Interesting Voice, T Tone, U Unused,
       V Vmb, 1 Custom1, 2 Custom2, 3 Custom3, [SPACE] Next(uninteresting)
      SECONDARY
       4 CCiTT#4, 5 CCiTT5, 6 Europe, 7 USA, 8 Asia, 9 Africa, 0 Other
      OTHER
       P Pause, Q Quit after this number scan, [ESC] quit immediately,
       X eXtent time-out for this call only for 5 seconds, R Re-dial number
    * everything will be logged. 18 log files will be created!
      Datfile will be created and used (!) ;-))

 ******************************************************************************
 *                                                                            *
 *            For any questions/suggestions/tips/bugs/wishes :                *
 *                        Email to vh@campus.de                               *
 *                                                                            *
 ******************************************************************************
