STEVIE - Simply Try this Editor for VI Enthusiasts Quick Reference Card by Tony Andrews And G. R. (Fred) Walter STEVIE may be freely distributed. The source isn't copyrighted or restricted in any way. If you pass the program along, please include all the documentation and, if practical, the source as well. STEVIE used to stand for 'ST Editor for VI Enthusiasts', however since this editor is used on more machines than just ST's the acronym was changed. Starting the Editor ------------------- The following command line forms are supported: vi [file ...] Edit the specified file(s) vi -t tag Start at location of the given tag vi + file Edit file starting at end vi +n file Edit file starting a line number 'n' vi +/pat file Edit file starting at pattern 'pat' If multiple files are given on the command line (using the first form), the ":n" command goes to the next file, ":p" goes backward in the list, and ":rew" can be used to rewind back to the start of the file list. Set Command Options ------------------- The ":set" command works as usual to set parameters. Each parameter has a long and an abbreviated name, either of which may be used. Boolean parameters are set as in: set showmatch or cleared by: set noshowmatch Numeric parameters are set as in: set scroll=5 Several parameters may be set with a single command: set novb sm report=1 To see the status of all parameters use ":set all". Typing ":set" with no arguments will show only those parameters that have been changed. The supported parameters, their names, defaults, and descriptions are shown below: Full Name Short Default Description ------------------------------------------------------------------------------ vbell vb vb Use visual bell (novb for audible bell) showmatch sm nosm Showmatch mode wrapscan ws ws Wrapscan (searches cross file start/end) errorbells eb noeb Ring bell when error messages are shown showmode mo nomo Show on status line when in insert mode backup bk nobk Leave backup in *.bak on file writes return cr cr End lines with cr-lf when writing list list nolist Show tabs and newlines graphically autoindent ai noai Start new line at same col as prior line ignorecase ic noic Ignore case in search strings number nu nonu Display lines with their line numbers scroll scroll 12 Number of lines to scroll for ^D and ^U tabstop ts 8 Number of spaces in a tab report report 5 Min # of lines to report operations on lines lines 25 Number of lines on the screen The EXINIT environment variable can be used to modify the default values on startup as in: setenv EXINIT="set sm ts=4" The 'backup' parameter, if set, causes the editor to retain a backup of any files that are written. During file writes, a backup is always kept for safety until the write is completed. At that point, the 'backup' parameter determines whether the backup file is deleted. In environments (e.g. OS/2 or TOS) where lines are normally terminated by CR-LF, the 'return' parameter allows files to be written with only a LF terminator (if the parameter is cleared). The 'lines' parameter tells the editor how many lines there are on the screen. This is useful on systems like the ST where various screen resolutions may be used. By using the 'lines' parameter, different screen sizes can be easily handled. On the Amiga system window resizes are atomatically detected and acted upon. It is suggested that one's window be larger than 2 rows and 5 columns. Colon Commands -------------- Several of the normal 'vi' colon commands are supported by STEVIE. Some commands may be preceded by a line range specification. For commands that accept a range of lines, the following address forms are supported: addr addr + number addr - number where 'addr' may be one of the following: a line number a mark (as in 'a or 'b) % (entire file) . (the current line) $ (the last line) The Global Command ------------------ A limited form of the global command is supported, accepting the following command form: g/pattern/X where X may be either 'd' or 'p' to delete or print lines that match the given pattern. If a line range is given, only those lines are checked for a match with the pattern. If no range is given, all lines are checked. If the trailing command character is omitted, 'p' is assumed. In this case, the trailing slash is also optional. The current version of the editor does not support the undo operation following the deletion of lines with the global command. The Substitute Command ---------------------- The substitute command provides a powerful mechanism for making more complex substitutions than can be done directly from visual mode. The general form of the command is: s/pattern/replacement/g Each line in the given range (or the current line, if no range was given) is scanned for the given regular expression. When found, the string that matched the pattern is replaced with the given replacement string. If the replacement string is null, each matching pattern string is deleted. The trailing 'g' is optional and, if present, indicates that multiple occurrences of 'pattern' on a line should all be replaced. Some special sequences are recognized in the replacement string. The ampersand character is replaced by the entire pattern that was matched. For example, the following command could be used to put all occurrences of 'foo' or 'bar' within double quotes: 1,$s/foo|bar/&/g The special sequence "\n" where 'n' is a digit from 1 to 9, is replaced by the string the matched the corresponding parenthesized expression in the pattern. The following command could be used to swap the first two parameters in calls to the C function "foo": 1,$s/foo\\(([^,]*),([^,]*),/foo(\\2,\\1,/g Like the global command, substitutions can't be undone with this version of the editor. The Delete Command ------------------ :[range]d will delete the range of lines. File Manipulation Commands -------------------------- :w write the current file :wq write and quit :x write (if necessary) and quit ZZ same as ":x" :e file edit the named file :e! re-edit the current file, discarding any changes :e # edit the alternate file :w file write the buffer to the named file :x,y w file write lines x through y to the named file :r file read the named file into the buffer :n edit the next file :p edit the previous file :rew rewind the file list :f show the current file name :f name change the current file name :ta tag go to the named tag ^] like ":ta" using the current word as the tag :help display a command summary :!cmd execute the 'cmd' via a system() call The ":help" command can also be invoke with the key on the Atari ST or the Amiga. This actually displays a pretty complete summary of the real vi with unsupported features indicated appropriately. The commands above work pretty much like they do in 'vi'. Most of the commands support a '!' suffix (if appropriate) to discard any pending changes. String Searches --------------- String searches are supported, as in vi, accepting the usual regular expression syntax. This was done using Henry Spencer's regular expression library without modification. Tony Andrews added code outside the library to support the '\<' and '\>' extensions and code inside the library to support the ignorecase option. Operators --------- The vi operators (d, c, y, <, and >) work as true operators. Tags ---- Tags are implemented. System-Specific Comments ------------------------ The following sections provide additional relevant information for the systems to which STEVIE has been ported. Atari ST -------- The editor has been tested in all three resolutions, although low and high res. are less tested than medium. The 50-line high res. mode can be used by setting the 'lines' parameter to 50. Alternatively, the environment variable 'LINES' can be set. The editor doesn't actively set the number of lines on the screen. It just operates using the number of lines it was told. The arrow keys, as well as the , , and keys are all mapped appropriately. UNIX ---- The editor has been ported to UNIX System V release 3. It's hard-coded for ansi-style escape sequences and doesn't use the termcap/terminfo routines at all. OS9 --- The editor has been ported to OS9 version 2.2. OS/2 ---- Make sure 'ansi' mode is on (using the 'ansi' command). The OS/2 console driver doesn't support insert/delete line, so STEVIE bypasses the driver and makes the appropriate system calls directly. This is all done in the system-specific part of the editor so the kludge is at least localized. The arrow keys, page up/down and home/end all do what you'd expect. The function keys are hard-coded to some useful macros until I can get true support for macros into the editor. The current mappings are: F1 :p F2 :n F3 :e # F4 :rew F5 [[ F6 ]] F7 << F8 >> F9 :x F10 :help S-F1 :p! S-F2 :n! MSDOS ----- STEVIE has been ported to MSDOS 3.3 on an AT using the Microsoft C compiler, version 5.10. The keyboard mappings are the same as for OS/2. The only problem with the PC version is that the inefficiency of the screen update code becomes painfully apparent on slower machines. BSD 4.3 ------- This port was done so it could be worked on in a main-frame enviroment. Amiga ----- The arrow keys and the help key are supported, as is window re-sizing. It is strongly suggested that you not try to type in console commands (alt-esc in some keymaps, plus the appropriate other keys) since STEVIE captures all console input. If you do type alt-esc then typing '|' will return you to STEVIE. If you have ARP installed, then you can use wildcards on the command line, in the :e command and in the :r command. If you 'run stevie' it will first attempt to open a window that is 640x200; if this doesn't work then it tries to open a window that is 480x200; if this fails it gives up. NOTE: that you can't use :!cmd on BCPL programs. Missing Features ---------------- 1. Macros with support for function keys. 2. More "set" options. 3. Many others... Known Bugs and Problems ----------------------- 1. The yank buffer uses statically allocated memory, so yanks of more than 5K of text will fail. If a delete spans more than 5K, the program asks for confirmation before proceeding. That way, if you were moving text, you don't get screwed by the limited yank buffer. You just have to move smaller chunks at a time. All the internal buffers (yank, redo, etc.) need to be reworked to allocate memory dynamically. 2. If you stay in insert mode for a long time (around 5K's worth of characters, including newlines) the insert buffer can overflow. When this happens you lose your ability to automatically undo the text just inserted and the redo/undo/(undo of undo) buffers are reset to the current position. 3. Several other less bothersome glitches... Character Function Summary -------------------------- The following list describes the meaning of each character that's used by the editor. In some cases characters have meaning in both command and insert mode; these are all described. ^@ The null character. Not used in any mode. This character may not be present in the file, as is the case with vi. ^B Backward one screen. ^D Scroll the window down one half screen. ^E Scroll the screen up one line. ^F Forward one screen. ^G Same as ":f" command. Displays file information. ^H (BS) Moves cursor left one space in command mode. In insert mode, erases the last character typed. ^J Move the cursor down one line. ^L Clear and redraw the screen. ^M (CR) Move to the first non-white character in the next line. In insert mode, a carriage return opens a new line for input. ^N Move the cursor down a line. ^P Move the cursor up a line. ^U Scroll the window up one half screen. ^V Indicates that the next character is should be treated as entered and not modified (used to enter control characters, etc.). ^Y Scroll the screen down one line. ^[ Escape cancels a pending command in command mode, and is used to terminate insert mode. ^] Moves to the tag whose name is given by the word in which the cursor resides. ^` Same as ":e #" if supported (system-dependent). SPACE Move the cursor right on column. $ Move to the end of the current line. % If the cursor rests on a paren '()', brace '{}', or bracket '[]', move to the matching one. ' Used to move the cursor to a previously marked position, as in 'a or 'b. The cursor moves to the start of the marked line. The special mark '' refers to the "previous context". + Same as carriage return, in command mode. , Reverse of the last t, T, f, or F command. - Move to the first non-white character in the previous line. . Repeat the last edit command. / Start of a forward string search command. String searches may be optionally terminated with a closing slash. To search for a slash use '\/' in the search string. 0 Move to the start of the current line. Also used within counts. 1-9 Used to add 'count' prefixes to commands. : Prefix character for "ex" commands. ; Repeat last t, T, f, or F command. < The 'left shift' operator. > The 'right shift' operator. ? Same as '/', but search backward. A Append at the end of the current line. B Backward one blank-delimited word. C Change the rest of the current line. D Delete the rest of the current line. E End of the end of a blank-delimited word. F Find a character backward on the current line. G Go to the given line number (end of file, by default). H Move to the first non-white char. on the top screen line. I Insert before the first non-white char. on the current line. J Join two lines. L Move to the first non-white char. on the bottom screen line. M Move to the first non-white char. on the middle screen line. N Reverse the last string search. O Open a new line above the current line, and start inserting. P Put the yank/delete buffer before the current cursor position. T Reverse search 'upto' the given character. W Move forward one blank-delimited word. X Delete one character before the cursor. Y Yank the current line. Same as 'yy'. ZZ Exit from the editor, saving changes if necessary. [[ Move backward one C function. ]] Move forward one C function. ^ Move to the first non-white on the current line. ` Move to the given mark, as with '. The distinction between the two commands is important when used with operators. I support the difference correctly. If you don't know what I'm talking about, don't worry, it won't matter to you. ~ Switch case of character under cursor. a Append text after the cursor. b Back one word. c The change operator. d The delete operator. e Move to the end of a word. f Find a character on the current line. h Move left one column. i Insert text before the cursor. j Move down one line. k Move up one line. l Move right one column. m Set a mark at the current position (e.g. ma or mb). n Repeat the last string search. o Open a new line and start inserting text. p Put the yank/delete buffer after the cursor. r Replace a character. s Replace characters. t Move forward 'upto' the given character on the current line. u Undo the last edit. w Move forward one word. x Delete the character under the cursor. y The yank operator. z Redraw the screen with the current line at the top (zRETURN), the middle (z.), or the bottom (z-). | Move to the column given by the preceding count.